| Series |
Description |
Applications |
| BLC |
Base-Load-Controller
with 2 to 32 Outputs
The BLC Series
Base-Load-Controller is micro-processor based and designed to control
up to 32 base loads plus one SCR controlled load. Mechanically,
it consists of two assemblies. The controller module (1 required)
and the eight channel output module (1 to 4 required).
|
Primarily
used to control large resistive heating loads.
•
High temperature furnaces
•
Large ovens, kilns & heaters
•
Boilers |
|
| DCPF1 |
Single-Phase
Phase-Fired Models
Rated 15, 25 Amperes with DC Output
The DCPF1 Series
are single-phase, phase-fired SCR Power Controls designed to deliver
DC Current with all the features normally found in much larger units.
Utilizing HDR's field proven circuits, these units are conservatively
engineered for years of trouble-free service while providing the
benefits of precise, reliable control for your electrical process.
|
Primarily used
to control saturable core reactors. Other uses include:
•
Vibratory Feeders
•
DC Resistive Loads
|
|
| PF1 |
Single-Phase
Phase-Fired Models
Rated 15 - 70 Amperes
The PF1 Series
are single-phase, phase-fired Solid-State Relay (SSR) Power Controls
designed to deliver maximum power control with the reliability normally
found in much larger units. Utilizing only two frame sizes, these
units are conservatively engineered for years of trouble-free service
while providing the benefits of precise, reliable control for your
electrical process.
|
Primarily
used to control dynamic resistive loads.
•
High temperature furnaces
•
Large ovens, kilns & heaters
•
IR Heating |
|
| PF1 |
Single-Phase
Phase-Fired Models
Rated 60 - 1200 Amperes
The PF1 Series
are single-phase, phase-fired SCR Power Controls designed to deliver
maximum power control with all the features normally found in much
larger units. Utilizing only four frame sizes, these units are conservatively
engineered for years of trouble-free service while providing the
benefits of precise, reliable control for your electrical process.
|
Primarily
used to control dynamic resistive or transformer coupled loads.
•
High temperature
furnaces
•
Large ovens, kilns
& heaters
•
IR Heating
•
Vibratory Feeders |
|
| PF3 |
Three-Phase
(6 SCR) Phase-Fired Models
Rated 60-1200 Amperes
The PF3 Series
are three-phase (6 SCR), phase-fired SCR Power Controls designed
to deliver maximum power control with all the features normally
found in much larger units. Utilizing only four frame sizes, these
units are conservatively engineered for years of trouble-free service
while providing the benefits of precise, reliable control for your
electrical process.
|
Primarily
used to control dynamic resistive or transformer coupled loads.
•
High temperature furnaces
•
Large ovens, kilns & heaters
•
IR Heating |
|
| RF3 |
Three-Phase
(6 SCR) Phase-Fired Models
Rated 30 - 1200 Amperes
The RF3 Series
are three-phase (6 SCR) phase-fired SCR Power Controls designed
to deliver maximum power control with all the features normally
found in much larger units. Utilizing only four frame sizes, these
units are conservatively engineered for years of trouble-free service
while providing the benefits of precise, reliable control for your
electrical process.
|
Primarily
used to control transformer coupled RF induction loads. |
|
| SCPF1 |
Single-Phase
Phase-Fired Models
Rated 15 - 65 Amperes
HDR's "touchsafe"
Model SCPF1 Series of single-phase, phase fired SSR (Solid-State
Relay) Power Controls are designed for the exacting needs of the
ceramic and semiconductor industries as well as standard resistance
heating applications.
|
Primarily
used to control dynamic resistive, non-inductive loads.
•
Ceramics
•
Semiconductors
•
Resistance Heating
•
IR Heating
|
|
| SCZF1 |
Single-Phase
Zero-Fired Models
Rated 15 - 65 Amperes
The Model SCZF1
Series of single-phase, zero fired SSR (Solid-State Relay) Power
Controls are designed for the exacting needs of the ceramic and
semiconductor industries as well as standard resistance heating
applications.
|
Primarily
used to control static resistive, non-inductive loads.
•
Ceramics
•
Semiconductors
•
Resistance Heating
|
|
| SHPF1 |
Single-Phase
Phase-Fired Models
Rated 15 - 120 Amperes
The SHPF1 Series
models are single-phase, phase-fired SCR Power Controls designed
to deliver maximum power control with all the features normally
found in much larger units. Utilizing only two frame sizes, these
units are conservatively engineered for years of trouble-free service
while providing the benefits of precise, reliable control for your
electrical process.
|
Primarily
used to control dynamic resistive or transformer coupled loads.
•
High temperature
furnaces
•
Large ovens, kilns
& heaters
•
IR Heating
•
Vibratory Feeders |
|
| SHPF3 |
Three-Phase
(6 SCR) Phase-Fired Models
Rated 15 - 225 Amperes
The SHPF3 Series
is designed to deliver maximum power control with all the features
normally found in much larger units. Utilizing only two frame sizes,
these units are conservatively engineered for years of trouble-free
service while providing the benefits of precise, reliable control
for your electrical process.
|
Primarily
used to control dynamic resistive or transformer coupled loads.
•
High temperature
furnaces
•
Large ovens, kilns
& heaters
•
IR Heating |
|
| SHZF1 |
Single-Phase
Zero-Fired Models
Rated 15 - 120 Amperes
The SHZF1 Series
models are single-phase zero-fired SCR Power Controls designed to
deliver maximum power control with all the features normally found
in much larger units. Utilizing only two frame sizes, these units
are conservatively engineered for years of trouble-free service
while providing the benefits of precise, reliable control for your
electrical process.
|
Primarily
used to control static resistive or non-inductive loads.
•
Small electric
furnaces
•
Electric ovens, kilns & heaters
•
Extrusion or injection molding |
|
| SHZF2 |
Three-Phase
(3-Wire Only) Zero-Fired Models
Rated 15 - 225 Amperes
The SHZF2 Series
is designed to deliver maximum power control with all the features
normally found in much larger units. Utilizing only two frame sizes,
these units are conservatively engineered for years of trouble-free
service while providing the benefits of precise, reliable control
for your electrical process.
|
Primarily
used to control static resistive or non-inductive loads.
•
Small electric furnaces
•
Electric ovens,
kilns & heaters
•
Extrusion or injection
molding |
|
| SHZF3 |
Three-Phase
(3 & 4 Wire) Zero-Fired Models
Rated 15 - 225 Amperes
The SHZF3 Series
is designed to deliver maximum power control with all the features
normally found in much larger units. Utilizing only two frame sizes,
these units are conservatively engineered for years of trouble-free
service while providing the benefits of precise, reliable control
for your electrical process.
|
Primarily
used to control static resistive, non-inductive 3 or 4 wire loads.
•
Small electric
furnaces
•
Electric ovens,
kilns & heaters
•
Extrusion or injection
molding |
|
| ZF1 |
Single-Phase
Zero-Fired Models
Rated 15 - 70 Amperes
The ZF1 Series
are single-phase zero-fired Solid-State Relay (SSR) Power Controls
designed to deliver maximum power control with all the reliability
normally found in much larger units. Utilizing only two frame sizes,
these units are conservatively engineered for years of trouble-free
service while providing the benefits of precise, reliable control
for your electrical process.
|
Primarily
used to control static resistive or non-inductive loads.
•
Small electric
furnaces
•
Electric ovens,
kilns & heaters
•
Extrusion or injection
molding |
|
| ZF2 |
Three-Phase
(3-Wire Only) Zero-Fired Models
Rated 15 - 70 Amperes
The ZF2 Series
are three-phase, zero-fired Solid-State Relay (SSR) Power Controls
designed to deliver maximum power control with the reliability normally
found in much larger units. Utilizing only two frame sizes, these
units are conservatively engineered for years of trouble-free service
while providing the benefits of precise, reliable control for your
electrical process.
|
Primarily
used to control static resistive or non-inductive loads.
•
Small electric furnaces
•
Electric ovens,
kilns & heaters
•
Extrusion or injection
molding |
|
| ZF2 |
Three-Phase
(3-Wire Only) Zero-Fired Models
Rated 60 - 1200 Amperes
The ZF2 Series
are three-phase (3-wire only) zero-fired SCR Power Controls designed
to deliver maximum power control with all the features normally
found in much larger units. Utilizing only four frame sizes, these
units are conservatively engineered for years of trouble-free service
while providing the benefits of precise, reliable control for your
electrical process.
|
Primarily
used to control static resistive or non-inductive loads.
•
Small electric furnaces
•
Electric ovens, kilns & heaters
•
Extrusion or injection molding |
|
| ZF3 |
Three-Phase
(3 & 4 Wire) Zero-Fired Models
Rated 15 - 70 Amperes
The ZF3 Series
models are three-phase (3 or 4 wire) zero-fired Solid-State Relay
(SSR) Power Controls designed to deliver maximum power control with
all the reliability normally found in much larger units. Utilizing
only two frame sizes, these units are conservatively engineered
for years of trouble-free service while providing the benefits of
precise, reliable control for your electrical process.
|
Primarily
used to control static resistive, non-inductive 3 or 4 wire loads.
•
Small electric furnaces
•
Electric ovens, kilns & heaters
•
Extrusion or injection
molding |
|
| ZF3
|
Three-Phase
(3 & 4 Wire) Zero-Fired Models
Rated 60 - 1200 Amperes
The ZF3 Series
models are three-phase (3 or 4 wire) zero-fired SCR Power Controls
designed to deliver maximum power control with all the reliability
normally found in much larger units. Utilizing only four frame sizes,
these units are conservatively engineered for years of trouble-free
service while providing the benefits of precise, reliable control
for your electrical process.
|
Primarily
used to control static resistive, non-inductive 3 or 4 wire loads.
•
Small electric furnaces
•
Electric ovens, kilns & heaters
•
Extrusion or injection molding |
| |
|
|
